Tips on Using a CO2 Laser

Lasers have become very popular tools that the dermatological field has been banking on for many of its regular procedures. Over the years, different types of lasers have been introduced with their own specific functions and applications. A versatile tool when it comes to ablative lasing is the CO2 laser. Also known as carbon dioxide laser, it is most useful in when it comes to performing a number of cosmetic, rejuvenation, and aesthetic procedures.

The laser is as versatile as it is powerful. In terms of lasers that are considered for their ablative functions, the CO2 type from a company like laser agent is regarded as the gold standard. The use of this technology in many dermatological procedures ensures that the patient is going to only feel minimal discomfort. It initiates faster recovery too. The short downtime means that people undergoing the procedure can easily get back to their routines quicker.

Still, proper use of the machine is critical in order to maximize the benefits of the procedure. This is why professionals in the dermatological field that are required use this tool in the treatments they provide need to have proper knowledge on how it works, how it should be operated, and how to observe safety when handling it at all times. Below are some important tips on using a CO2 Laser for any dermatological procedure.

Secure proper consent

Any procedure involving this tool should not be performed unless informed consent has been obtained from the patient. This is to ensure that the patient has a clear understanding of the specifics of the procedure, the areas to be treated, and the results that can be expected out of it.

Proper positioning is important.

The patient needs to be positioned right. Professionals must consider the area where the lesion is to be treated. The area that requires treatment should be close to the CO2 laser.

Apply anesthesia when necessary

There are different types of anesthesia that may be administered to the patient. It can be a topical one, a local infiltration, a field block, or a ring block. This will have to depend on the type of lesion that requires treatment and the site where they are located.

Proper eye protection

Proper eye protection should be worn by both the dermatologist and the patient. Wet gauze or an eye shield can be used to protect the eyes of the patient during the procedure. For the dermatologist and any other person assisting him, spectacles that are wavelength rate should be worn.

Handle the laser right

The laser needs to be held in a perpendicular direction to the lesion that needs to be treated. A foot pedal is used to get it fired. The lesions should be vaporized from the top using a horizontal, vertical, centrifugal, or coiled fashion. Make sure to always use wet gauze when wiping any vaporized lesions.

The treated area needs to be dried properly afterward, and any bleeding spot should be properly coagulated by getting the beam of the laser defocused. The laser’s hand piece pointer should be used to cut the skin. To maximize the power of the laser, it can be super pulsed.

Many clinicians today offer a wide range of CO2 laser treatments due to how incredibly effective and safe they are. If you want to use the same technology in your dermatological practice, getting the right training is critical to ensure that you are not just maximizing its use but that you are using it the safe way too.

Comments are closed.